Home Poles Standard Range Subdivision Poles

Subdivision

Spunlite Standard Range Subdivision poles are a cost effective way to provide lighting poles for residential roads.

Subdivision poles are manufactured in Christchurch, New Zealand from NZ steel and come with a galvanized finish. These poles are a stock to enable a quick turnaround on orders of up to 10 units.

Applications

Residential P Category Roadways
Private subdivisions
Cycleways
Walkways
Car parks
Amenity Area’s

Features

Ground planted
Friction fit sections
Standard sections are 3.6m long
6.0m & 7.0m mounting heights
Octagonal cross section
Spungard in-ground protective coating to prevent corrosion
Economic subdivision pole option

Spunlite is listed as an accepted supplier on Waka Kotahi NZTA M26 2012

Outreach Configurations

Two types of curved outreach available:
- 0.9m curved outreach arm with 42mm diameter spigot at 5° tilt
- 1.5m curved outreach arm with 42mm diameter spigot at 5° tilt

Supporting Documents

6.0m Subdivision Pole Drawing

6.0m Subdivision Pole

7.0m Subdivision Pole Drawing

7.0m Subdivision Pole

Subdivision Pole with 0.9m Outreach

Subdivision Pole with 1.5m Outreach

Subdivision Poles

The table below details subdivision pole mounting height, planting depth and outreach configurations, all dimensions are nominal.

	Outreach Length		Planting Depth
	0.9m	1.5m	Planting Depth
Mounting Height	6.0	6.1	1.0
Mounting Height	7.3	7.4	1.3