Please allow javascripts to see this page correctly
X close menu

Street Lighting

The Spunlite Standard Range Street Light poles are octagonal sectional steel poles used on both the State Highway and Local Authority roading networks.

Our Street Light poles are manufactured in Christchurch, New Zealand from NZ steel and come galvanized with an in-ground protective coating. These poles are in stock to enable a quick turnaround on orders of up to 10 units.

  • Highway/Motorway/Expressway
  • Major local roads
  • V category Roadways
  • P category Roadways
  • Intersections
  • Roundabouts
  • Designed to AS/NZS1170
  • Standard range covers ground plant poles only. Shear base and flange base streetlight poles are made to order.
  • Friction fit sections  
  • Standard sections lengths are 3.6m long
  • 7.0m, 8.0m, 9.0m, 10.0m 11.0m & 12.0m mounting heights (7.0m available for curved outreach option only)
  • Octagonal cross section
  • Spungard in-ground protective coating to prevent corrosion.


Spunlite is listed as an accepted supplier on Waka Kotahi NZTA M26 2012

Outreach Configurations

Two types of single outreach available:

  • Curved outreach arm with 42mm diameter spigot at 5° tilt
  • Mitred outreach arm with 42mm diameter spigot at 5° tilt

Both versions available in lengths of 1.0m, 2.0m and 3.0m

Note: 4.0m single and all double, triple and quadruple outreaches are made to order.

The table below detail height and outreach configurations based of mounting option, all dimensions are nominal.
Ground Planted Columns
Outreach Length Planting Depth
1.3m 2m 3m



Mounting Height








7.4 7.5 7.7 1.5
7.7 7.8 8.0 1.7
8.6 8.7 8.9 1.7
10.0 10.1 10.3 2.0
11.1 11.2 11.4 2.2
11.8 11.9 12.1 2.5