Home Poles Standard Range Floodlight Poles

Floodlight Poles

The Spunlite Standard Range Floodlight poles are suitable for lighting any area from car parks through to sports grounds. Available in both ground planted or flange base options with cross arms to take from 1, 2 or 3 light fittings.

Our floodlight poles are manufactured in Christchurch, New Zealand from NZ steel and come with a galvanized steel finish. These poles are held in stock to enable a quick turnaround on orders of up to 10 units.

Applications

Storage Yards
Car Parks
Secure Areas
Sports & Training Grounds
Outdoor Work Areas

Features

Ground planted and flange base options
Friction fit sections
Standard sections are 3.6m long
7.0m to 14.0m mounting heights available
Octagonal cross section
Spungard or Epoxy in-ground protective coating to prevent corrosion.

Cross Arms

Cross arms to mount one, two or three stirrup mounted light fittings are held in stock.

Cross Arms are designed to fit on to the 76mm OD pole top spigot.

Supporting Documents

Ground Plant Floodlight Poles

6.0m GP Pole 7.0m GP Pole 8.0m GP Pole 10.0m GP Pole 12.0m GP Pole 14.0m GP Pole

Flange Base Floodlight Poles

6.0m FB Pole 7.0m FB Pole 8.0m FB Pole 10.0m FB Pole 12.0m FB Pole 14.0m FB Pole

Cross Arms

Cross Arm Options

Hold Down Bolt Assemblies

M16 x 600mm Long @ 220crs M20 x 600mm Long @ 220crs M24 x 600mm Long @ 220crs

The tables below detail mounting height and planting depth, all dimensions are nominal.

Ground Planted Poles

Ground Planted Flood Lighting Pole	Estimated Planting Depth (m)
Mounting Height (m)	Estimated Planting Depth (m)
6.0	1.2
7.0	1.5
8.5	1.8
9.7	2.0
12.2	2.5
11.2	2.2
12.2	2.5
13.7	2.8

Available with either full Spungard or Epoxy strip in-ground protection.

Flange Based Poles

Flange Based Flood Lighting Pole
Mounting Height (m)
5.9	Foundations can be designed on request at an additional cost.
7.1
8.5
10.3
11.7
13.5