Subdivisional Poles
- specifying guide
The table sizes below contain links to drawings of poles for you to download or print. You can also send an enquiry or place an order directly from your selected drawing.
|
|
Curved Arm
|
mounting height |
plantingdepth | ||
|---|---|---|---|
| 0.9m | 1.5m | 2.0m | |
| 6.0 | 6.1 | 6.2 | 1.0 |
| 7.3 | 7.4 | 7.5 | 1.3 |
Mitred Arm
| mounting height - outreach length |
plantingdepth | ||
| 0.9m | 1.5m | 2.0m | |
| 6.0 | 6.1 | 6.2 | 1.0 |
| 7.3 | 7.4 | 7.5 | 1.3 |
All dimensions are nominal. We will happily discuss constructing custom made poles, outreach arms and mounting heights to suit individual project specifications. Note: Standard specification is curved outreach, ground planted unless otherwise specified. 34mm o.d. spigot is standard. Alternative spigot angles/diameter available on request.
Foundations
Click here to view specific foundation images:
 |
Outreach configurations
Outreach configurations are available standard as a single, double, triple and quadruple. Please specify your requirement accordingly. Standard 'double' curved outreach pictured |
Outreach configurations are available standard as a single, double, triple and quadruple. Please specify your requirement accordingly.
